User guide

iSCSI: Creating IP-Based Storage Area Networks (SAN)
45
You can connect iSCSI drives on your Iomega StorCenter to your computer using Iomega Storage
Manager or the Microsoft software initiator. If you are using another type of software or hardware
initiator, you must use the native tools provided with your initiator to connect your iSCSI drives.
Caution: Attempting to connect two clients (iSCSI initiators) to the same iSCSI drive at the same
time may result in data corruption or drive damage. The Iomega StorCenter Console prevents you
from connecting two clients (iSCSI initiators) to the same iSCSI drive at the same time, but if you
connect to an iSCSI drive using native tools, you may encounter this issue. You can use the
Connected Clients section to view a list of client computers connected to your Iomega StorCenter
that are running iSCSI initiator software. On the iSCSI page, expand an iSCSI drive, then expand the
Connected Clients section. If the iSCSI drive is in use, you will see a list of connected client
computers running initiator software.
How do I ...
manage iSCSI drives
delete iSCSI drives