Operation Manual

1. Drive Access Door—The door can be locked to protect the disks from accidental
removal.
2. Status Indicator—Displays the current operational status of the StorCenter Pro Server.
Off: StorCenter Pro is not running.
Solid red: StorCenter Pro not ready (powering up or firmware flashing)
Flashing red: StorCenter Pro not ready, busy (formatting drive, resetting
to default settings, repairing drive, or powering down)
Solid green: Iomega StorCenter Pro Server is running. This LED is green
when the StorCenter Pro Server is running normally.
Alternating red/green: The drive ID feature has been activated on the
StorCenter Pro Server.
Alternating red (3x)/green (3x): Drive failure.
3. Disk Usage—This indicator flashes whenever the internal hard drive(s) are in use.
Solid blue: Drive present/healthy.
Flashing blue: Hard drive activity.
4. High Speed USB 2.0 Connectors—Supports devices such as USB storage devices and
printers. The StorCenter Pro Server is capable of sharing a single USB printer and four
USB storage devices with other systems on your network.
5. Power Button/Factory Reset Button—Use the power button to start or shut down the
Iomega StorCenter Pro server. Hold the Power Button down for 12 seconds to reset
the StorCenter Pro to factory defaults.