Operating Guide

3
Features
Top Panel
Power Button: Press and hold to turn Acadia
TM
on and off.
Note: Acadia
TM
will automatically power off after 15 minutes if no audio is playing.
Bluetooth
®
Button: Press and hold to disconnect a Bluetooth device.
Double-press to enter Multi-Sync
TM
mode.
See Bluetooth Connecting with Acadia
TM
to learn how to connect via Bluetooth and
sync multiple Multi-Sync
TM
compatible speakers.
BASS Bass Boost Button: Press this button to enhance the overall bass frequency response.
Radio Button: Press this button enter FM radio mode.
– / +
V
olume Buttons: Press these buttons to decrease or increase the speaker volume.
< / > Tune/Track Buttons: Press these buttons to tune in a radio station or go to the
previous/next track on a Bluetooth connected device. The voice prompts will indicate
the current frequency.
To “seek” (jump to the next available radio station) in radio mode, hold either button
down for a few seconds.
Play/Pause Button: Press this button to play or pause on a connected Bluetooth
device.
When Bluetooth connected, press and release this button to answer a phone call.
To reject an incoming call, press and hold this button. To end the call, press this
button again.
Rear Panel
A. Aux In: This stereo 1/8” (3.5 mm) input can be
used to connect a CD player, MP3 player, or
other audio source.
B. USB Device Charging Port (5V, 1A): Connect
your device’s charge cable here to charge it.
USB charging only functions when the unit’s
power is turned on.
Note: You may experience some noise when charging certain devices while also using
the aux input.
C. Lights Button: Press this button to cycle between light modes.
D. Micro-USB Speaker Charging Port: For fastest charging, power off Acadia
TM
and use
the included micro-USB cable to connect the speaker to (A) a USB power adapter (DC
5V, not included) connected to a power outlet, or (B) your computer (powered on).
A solid red LED will appear next to the power button to indicate that the speaker is
charging. When charging is complete, the red LED will turn off.