Specifications

3. Enter a two-digit Pattern number with the number buttons. If desired, choose between the

A/B variations and Preset/User options.

4. If you want to enter another Pattern, press the INC button to move to the next step; or press

the DEC button to return to a previous step and change its Pattern.

5.3B Add a Fill

1. With the IED04 in Song and Compose modes, select the step where the Fill is to be added.

2. Press and hold the FILL button.

3. Enter the number of beats and sub-beats after the start of the current step in which the Fill is

to start playing with the number buttons and INC/DEC buttons respectively. It is not necessary

to press PLAY; the step will remember where the Fill is to occur.

4. As the Song plays the step where the Fill occurs, the display will show FILL when the Fill

begins playing.

5.3C Remove a Fill

While in Compose mode, there are two ways to remove a Fill from a Song:

• When the Fill step appears, press the A button for an A Pattern or press the B button for a B

Pattern and the Fill will be removed.

• When the Fill step appears, press and hold the FILL button and press ERASE.

5.3D Insert a New Step Between Two Existing Song Steps

1. The IED04 should be in Song and Compose modes.

2. Use the INC/DEC buttons to select the step number that the inserted step should occupy.

Example: To insert a step after step 04, select step 05.

3. Press and hold COPY, and keep holding it down until step (6). The display says INSERT.

4. Enter the two-digit Pattern number to be inserted.

5. Press PLAY. The new step is inserted, and all subsequent steps are automatically re-

numbered to reflect the addition of the inserted step (e.g., what used to be step 05 is now step

06, what used to be step 06 is now step 07, etc.).

6. Release the INSERT and PLAY buttons.

5.3E Delete a Step

1. The IED04 should be in Song and Compose modes.

2. Use the INC/DEC buttons to select the step number to be deleted.

3. Press and hold ERASE. The display says ERASE STEP?

4. While continuing to hold ERASE, press PLAY. The step is deleted, and all subsequent steps

are automatically re-numbered to reflect the deletion of the inserted step (e.g., what used to

be step 06 is now step 05, what used to be step 07 is now step 06, etc.). The display says

STEP ERASED for as long as the ERASE and PLAY buttons are pressed.

5. Release the ERASE and PLAY buttons.