Specifications

6
1.4 10 STEPS TO INSTANT GRATIFICATION (SETUP AND CHECKOUT)
1. Connect the Main outputs (either left or right for a mono monitoring system, or both for
stereo) to a high-quality musical instrument amplifier, PA, or plug the included headphones into
the headphone output on the back of the iED04. The amp and IED04 volume control (on back)
should be all the way down (counter-clockwise).
2. Leave the MIDI jacks (rear panel) disconnected for now.
3. Plug the IED04's AC adapter into the wall. The smaller plug inserts in the 9V AC Power jack
on the back.
4. Turn on the rear panel On/Off switch, then turn on the amplifier.
5. The LCD will show a sign-on message. The upper right of the display should say PATTERN
and not SONG; if it shows SONG, press the PATTERN/SONG button and the display will show
PATTERN.
PRESS PLAY
TEMPO
PERFORM
EMPTY
PATT
PATTERN
A
USER
6. Start striking the pads with the drumsticks. Adjust the volume control for a comfortable
listening level, and check out the sounds.
7. To hear the built-in demo, hold down the PATTERN/SONG button and press PLAY. To stop
the demo, press STOP. If you want to play along with the demo, feel free to bash away on the
pads.
8. Press PLAY, and you'll hear a Preset Pattern. (In case the IED04 has already been played
with, make sure that the display shows PERFORM and does not show USER before
continuing. To choose Perform mode, press the PERFORM/COMPOSE button until the
Perform/Compose section of the display shows PERFORM). To choose Preset rather than
User Patterns, press the PRESET/USER button until the display does not show USER. If
USER is not showing, then Preset Patterns are selected.