iPA122 User Guide English ( 3 – 9 ) Guide d’utilisation Français ( 10 – 16 ) Appendix English ( 17 – 18 )
User Guide (English) Introduction Thank you for purchasing the Total PA Glow 3. At ION, your entertainment is as important to us as it is to you. That’s why we design our products with one thing in mind—to make your life more fun and more convenient. 1. Make sure all items listed in the Box Contents are included in the box. Look in the box under the foam sheet for the speaker stand rubber feet, speaker stand mounting knob, power cable, and microphone. 2.
Quick Setup Connection Diagram Items not listed under Introduction > Box Contents are sold separately. SD Card USB drive Smartphone Microphones Power Tablet Speaker Stand Installation 1. Fully extend the speaker stand tripod legs on a flat, stable surface. Look in the box contents under the foam sheet for the rubber feet and speaker stand mounting knob. 1 2. Raise the mounting pole up to the appropriate height needed and tighten the side adjustment knob. 3.
Features Rear Panel 1. Media Panel: Button controls for the USB/SD, FM radio, and Bluetooth audio sources. These controls include mode selection and playback options. See Media Panel below for more information. Note: A USB drive or SD card must contain playable files in order for it to appear properly in the media panel’s display. You can play MP3s, 16-bit WAVs, FLAC, APE, and WMA files. 2. USB Port: Connect your USB flash drive here to play music. You can also use this port for charging a USB device. 3.
18. Light Mode Button: Press this button to toggle between four modes for the lights on the front panel: • Auto 1: The lights steadily cycle through different colors. As they cycle, the light ring will be the same color as the glowing woofer. While operating in this mode, press and hold the Light Mode button to freeze the lights on their current color. Press and hold again to unfreeze. Auto 1 is the default mode when Total PA Glow 3 is powered on.
Operation App Control IMPORTANT: To ensure the best possible experience with the app, use the most current Android OS or iOS on your device. Note: Ensure that your device has internet access via your service provider or wireless connection. You can also download the app on your computer, but remember to connect and sync your device to transfer the app. Follow these steps to download the free app on your device: 1. Open the Apple App Store or Google Play on your device. 2. Search for the ION Sound XP app. 3.
Connecting Two Speakers To wirelessly link two Total PA Glow 3 speakers: 1. Power on both speakers using their Power Switches. 2. With no Bluetooth connected, press the Link button on one Total PA Glow 3 to enter Stereo Link Mode. Then, press the Link button on a second Total PA Glow 3 to begin pairing. 3. Wait up to 1 minute for the speakers to make the connection. Once the two speakers are linked, press the Mode button on either speaker to select Bluetooth mode and begin the Bluetooth pairing process.
Troubleshooting If the sound is distorted: Try lowering the volume control of your sound source, musical instrument, or microphone. Also, try to reduce the overall volume of Total PA Glow 3 using the Master Volume knob. If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. This will allow you to play the music louder before clipping (distortion) occurs. If there is a high-pitched whistling noise when using a microphone: This is probably feedback.
Guide d'utilisation (Français) Présentation Merci d’avoir fait l’acquisition de l’enceinte Total PA Glow 3. Chez ION, votre divertissement est aussi important pour nous qu’il l’est pour vous. C’est pourquoi nous concevons nos produits avec une seule chose en tête — rendre la vie plus amusante et plus pratique. 1. Assurez-vous que tous les articles énumérés dans le Contenu de la boîte de ce guide sont inclus dans la boîte.
Démarrage rapide Schéma de connexion Les éléments qui ne figurent pas dans Présentation > Contenu de la boîte sont vendus séparément. Carte mémoire SD Clé USB Téléphone intelligent (smartphone) Microphones Alimentation Tablette Installation du support pour enceinte 1. Déployez entièrement les pieds du support sur une surface plate et stable. Dans la boîte, sous la feuille de polystyrène se trouvent les pieds en caoutchouc et le bouton du support de l'enceinte. 1 2.
Caractéristiques Panneau arrière 1. Panneau des médias : Commandes pour les sources USB/SD, radio FM et Bluetooth. L’icône de la source actuelle s'allume dans l’écran lorsque cette source est sélectionnée par le Panneau des médias. Veuillez consulter la section Panneau des médias pour une description des les commandes. Remarque : La clé USB ou la carte SD doit contenir des fichiers lisibles par l'appareil afin que ces derniers s’affichent dans le panneau multimédia.
18. Touche de mode d'éclairage : Cette touche permet de commuter entre les quatre modes d’éclairage du panneau avant : • Auto 1 : Cette option permet d’alterner toutes les couleurs. En ce mode, l’anneau lumineux et le hautparleur d’extrêmes graves sont de la même couleur. Vous pouvez maintenir la touche du mode d’éclairage enfoncée afin que les lumières restent allumées dans la couleur actuelle. Pour alterner de nouveau les couleurs, maintenez la touche du mode d’éclairage enfoncée.
Fonctionnement Contrôle d'application IMPORTANT : Afin de profiter de la meilleure expérience possible avec l’application, assurez-vous d’avoir la toute dernière version de Android OS ou de iOS sur votre appareil. Remarque : Veuillez vous assurer que votre appareil dispose d’une connexion Internet. Vous pouvez également télécharger l’application gratuite sur votre ordinateur, mais n’oubliez pas de connecter et de synchroniser votre appareil afin de transférer l’application.
Relier deux enceintes Pour relier sans fil deux enceintes Total PA Glow 3 : 1. Mettez les deux enceintes sous tension à l'aide de leurs interrupteurs d'alimentation. 2. Vérifiez qu’aucun appareil Bluetooth n’est connecté, puis appuyez sur la touche Link d’une des enceintes Total PA Glow 3 afin de passer en mode Stereo Link. Appuyez ensuite sur la touche Link de la deuxième Total PA Glow 3 pour lancer le jumelage. 3. Attendez environ 1 minute afin que les enceintes puissent établir la connexion.
Dépannage Lorsqu'il y a de la distorsion : Essayez de diminuer le volume sur l'appareil d'entrée audio ou l'instrument de musique. Essayez également de diminuer le volume de la Total PA Glow 3. Lorsqu'il y a trop de basses fréquences : Essayez de régler le niveau de tonalité et d'égalisation de la Total PA Glow 3 ou de la source d'entrée audio afin de diminuer le niveau des basses fréquences. Cela vous permettra d'augmenter le volume de la musique avant que l'écrêtage se produise.
Appendix (English) Technical Specifications Output Power 500 W (Peak) Max SPL (@ 1 m) 116 dB peak, 110 dB continuous C-weighted, free space Low Frequency 15” (381 mm) woofer High Frequency 1” (25 mm) tweeter Crossover 2.
Protection Features Over-excursion, thermal, short-circuit protection Power 100–120 VAC, or 220–240 VAC; 50/60 Hz Dimensions 17.5" x 14" x 27" (depth x width x height) 445 x 356 x 686 mm Weight 36.24 lbs. 16.44 kg Specifications are subject to change without notice. * Bluetooth range is affected by walls, obstructions, and movement. For optimal performance, place the product in the center of the room so it is unobstructed by walls, furniture, etc.
ionaudio.com Manual Version 1.