Datasheet

6 7

FEATURES

1. Hook - Use this to hang SOUND SPLASH from a shower

head or shower stall.

2. Speaker - Listen to music or a phone call from this full range

speaker.

3. Power On/Off - Press and hold this button for 4-5 seconds to

power SOUND SPLASH on/off.

4. Bluetooth - Press and hold this button for 2 seconds to

activate pairing mode on SOUND SPLASH. Press and hold it

again for 2 seconds to unpair your device. If you do not

unpair your device, SOUND SPLASH will "remember" your

device even if it is powered off then on again.

5. Call Receive/Call End - When a paired device receives a

phone call, press this button to answer the call; press it again

to disconnect the call.

6. Volume Down - Turns down the volume for a paired

Bluetooth device.

7. Play/Pause - Press this button to start/pause music playback

on a paired music device.

8. Volume Up - Turns up the volume for a paired Bluetooth

device.

9. Microphone - Talk into this after receiving a call.

10. Micro USB Port - Use the included USB cable to connect

this port to a USB port on your computer or phone

charger to recharge SOUND SPLASH's battery.

11. Suction Cups - Attach these to the back of SOUND

SPLASH and then to the shower wall.

Note: Attach the suction cups to a solid, non-porous surface

for an airtight seal. Glass, metal, smooth tile and polished

wood are surfaces where suction cups stick best.

Note: For best results, ensure that the shower wall is

thoroughly clean and dry before attaching suction cups.

345

1010