Quickstart Guide English ( 3 – 8 ) Guía de inicio rápido Español ( 9 – 14 ) Guide d’utilisation rapide Français ( 15 – 21 ) Guida rapida Italiano ( 22 – 28 ) Schnellstart-Anleitung Deutsch ( 29 – 35 ) Snelstartgids Nederlands ( 36 – 42 ) Appendix English ( 43 )
Quickstart Guide (English) Introduction Thank you for purchasing the Party Boom. At ION, your entertainment is as important to us as it is to you. That’s why we design our products with one thing in mind—to make your life more fun and more convenient. Box Contents Party Boom Microphone with Cable 1/8” (3.
Quick Setup 1. Make sure all items listed in the Box Contents are included in the box. 2. Read the Safety & Warranty Manual before using the product. 3. Make sure the battery is completely charged prior to first use for maximum battery life. 4. Study the Connection Diagram. 5. Ensure the Master Volume on Party Boom is at zero. 6. Connect your devices. 7. Raise the volume to a comfortable level. 8. Return the Master Volume to zero when you are finished using Party Boom.
Features Front Panel MIC AUX IN 11 13 1 12 CHARGE 5V 1A 7 2 3 MIN 9 8 MIN MAX 11 5 6 4 MAX 10 1. Power Button: Turns Party Boom on or off. Please note that while Party Boom is connected to a power source, it does not need to be powered on to charge the battery. When the power is on, the display will show the power indicator. 2. Bluetooth Button: Press and release this button to start pairing. Press the Bluetooth button to disconnect a paired Bluetooth device. 3.
9. Display: Displays the current radio station, battery status, and Bluetooth status. • • Charging Indicator: • When the power cable is connected, movement of the battery segments shows the battery is charging. When fully charged, all battery segments will be lit without blinking. • When the power cable is disconnected, the battery segment shows the level of the battery. • When the battery level is low, the bottom battery segment will blink.
Operation Using the Radio Selecting a radio station: 1. 2. Press the Radio button to select FM1, FM2, or AM. Press either of the Tune/Track buttons to select a radio station. To “seek” (jump to the next available station), hold either button down for a few seconds until it starts to seek a station. Saving a radio station as a preset: 1. Press the Radio button to select FM1, FM2, or AM. 2. Press either of the Tune/Track buttons to select a radio station. 3.
Stereo Linking Two Party Boom Speakers* To link two Party Boom’s together for stereo sound: 1. Press and hold the Play/Pause/Link button on both speakers to enter Stereo Link mode. A tone will be heard and the word LINK will blink when in the process of linking to the second speaker. Once a link has been established, the word LINK will be lit solid. Note: The linking process can take up to a minute to complete. The closer the two speakers are to each other, the quicker the linking process occurs. 2.
