Shutter Pal Quickstart Guide English ( 3 – 5 )
Quickstart Guide (English) Introduction Box Contents Shutter Pal Smartphone Clamp Smartphone Clamp Insert Micro-USB Cable Quickstart Guide Support For the latest information about ION products (system requirements, compatibility information, etc.) and product registration, visit ionaudio.com. For safety and warranty information, see ionaudio.com/warranty. Safety Information • Only use attachments/accessories specified by the manufacturer. • Do not dismantle the monopod.
Quick Setup After pairing your smartphone to Shutter Pal and launching your smartphone’s default camera app, follow these steps to connect the monopod to your smartphone. 1. 2. 3. 4. 5. Insert your smartphone into the smartphone clamp. Use the included insert if you have a smaller size smartphone. Connect the smartphone clamp to the monopod screw and tighten using the rotary wheel. Adjust the position of the mount and tighten using the side knob. Adjust the size of the monopod.
Pairing Shutter Pal With Your Smartphone 1. 2. 3. 4. 5. 6. Turn on your smartphone. Power on Shutter Pal. Hold the Camera button on Shutter Pal for 2 seconds to go into Bluetooth pairing mode. Note: Once in pairing mode you will have 40 seconds to connect to your Bluetooth smartphone or you will need to restart the power of Shutter Pal and go into pairing mode again. Navigate to your Bluetooth smartphone’s settings menu, find Shutter Pal, and connect.
Appendix (English) Technical Specifications Supported Bluetooth Profile A2DP Bluetooth Range Over 10 meters (over 30 feet) Battery Battery type: 45 mAH polymer lithium Battery life: Up to 100 hours in standby mode (or up to approximately 500 photos) Recharge time: 1 hour Power Power adapter sold separately. You may use your smartphone's 10W or 5W USB power adapter. Length of Monopod Extension 23.5 cm - 100.5 cm (9.25” - 39.56”) Max Load Capacity 0.5 kg (1.1 lbs.) Weight 0.17 kg (0.37 lbs.
ionaudio.com Manual Version 1.
