manual

ADJUST YOUR SETTINGS

Follow the steps in this section to customize the settings of:

1. Your user information (see SET YOUR PERSONAL SETTING)

2. Your ION USB Wrist Blood Pressure Monitor or USB Insta-Scan Thermometer (see SET YOUR

DEVICE SETTING)

3. The software itself (see SET YOUR SOFTWARE SETTING)

SET YOUR PERSONAL SETTING

This window contains two tabs: Personal Information and Measurement Interval. These parameters will

be reflected when you review your readings.

1. Place your mouse over the Settings Menu (hammer icon) and click Personal Setting.

2. The first tab is the Personal Information tab.

• Enter your name, birthday, gender, height, and weight.

• If you are using the ION USB Wrist Blood Pressure

Monitor: The fields for Sys Pressure (Lower/Upper

Limit) and Dia Pressure (Lower/Upper Limit) are the

recommended minimum / maximum values for your

systolic and diastolic pressures (respectively). The

values you first see in these fields have been set

according to recommendations from the American

Diabetes Association. However, we highly recommend

consulting with your health care professional to

determine if these values are ideal for you.

• If you are using the ION USB Insta-Scan

Thermometer: The fields for Thermometer Level (Lower/Upper Limit) are the typical

minimum/maximum values for the temperature of the human body. We highly recommend

consulting with your health care professional to determine if these values are ideal for you.

3. Click the Save button (disk icon) in the lower right corner to save your information.

4. Click the Measurement Interval tab.

5. Each row represents an interval of the day during which

you plan to take a blood pressure reading or temperature

reading. Click the "AM/PM," the hour, and the minute in

the white fields, then type in the number or use the

up/down arrows to set the end time of that interval. The

gray fields will adjust automatically.

• Example: If you plan to take a reading before

breakfast, which you normally do at 8 a.m., set the

"Before breakfast" interval to end at 8 a.m.

• Note: These intervals cannot overlap each other or be

set out of sequence. If you try to set the end time of an

interval to overlap another, you will see an error

message. Simply click "OK" and set the interval so it does not overlap another.

• Note: You can click the Default button (paper/star icon) to return all the intervals to their default

times.

6. Click the Save button (disk icon) in the lower right corner to save your information.