Product Manual

StormPro
®
BA Series
Sump Pump
OPERATION MANUAL
Dated: 02/15/2013
Document Name: StormPro_BASeries_OM
Page 5 of 8
Register your product at www.sumpro.com
Warranty regIstratIon card
Please ll out and send back to: Metropolitan Ind. Warranty Department P.O. Box 7266 Romeoville, IL 60446. Or
to register online, go to www.sumpro.com
StormPro
®
BA Series Warranty Registration Card
To register your purchase, please ll in the following information:
Name:
Address:
City
Purchased From:
Installed By:
Phone:
Date:
State: Zip:
Warranty VoId If...
The following may cause severe damage to pump and will void the warranty:
1. Using an extension cord.
2. Power cord has been cut or altered.
3. Cutting off the ground pin or using an adapter tting.
4. Working on pump or switch while plugged in.
5. Removing motor housing, unscrewing impeller, or otherwise removing impeller seal
6. Running the pump continuously.
7. Pumping chemicals or corrosive liquids.
8. Pumping gasoline or other ammable liquids.
9. Removing cord tags.
10. Pump will be inadequate if suspension liquids contain solid particles larger than the strainer’s holes.