Ion+ Manual

Ion+
®
Digital Level Control Switch With Alarm
OPERATION MANUAL
Dated: 08/01/2013
Document Name: Ion+_OM
Page 2 of 4
www.ionstormpro.com
Lowest
pump
off level
BE SURE TO MOUNT THE ION+
®
SWITCH AT PROPER LEVEL.
6” Range
On
8” Range
Alarm
Ion
+®
Digital
Level Switch
Recommended
1/8” anti-airlocking
hole (if not already
provided by pump
manufacturer)
or
Optional
bracket
FIGURE A
FIGURE C
FIGURE B
NOTE: If you purchased a pump with the Ion+
®
switch hard-mounted to the pump (Figure D) and
the installation requires the switch be mounted to the
pipe, the pipe-mount bracket is sold separately, PN:
IN-SPB1-1.
Ion+
®
Switch
piggy-back
Pump plug
FIGURE E
be a click.
saFety Precautions
CAUTION: To prevent electric shock, ensure
product is connected to a grounded outlet.
The electrical outlet should be properly wired to a
dedicated 15A circuit breaker. Proper short-circuit
and overload protection must be provided at the
distribution panel. Install in accordance with all local
and national electrical codes.
WARNING: Electrical outlet must not be
located in pump pit. For best performance, do
not use electrical extension cords.
installation Drawing
FIGURE D
6" Range
On
8" Range
Alarm