Controller Manual

Ion Genesis
®
II Pump Controller
Digital Level Control with Pump Alternation
and High Water Alarm
OPERATION MANUAL
Dated: 07/10/2017
Document Name: IonGenesisII_OM
Page 7 of 8
www.ionproducts.net
Figure 5: Non-Alternating, Simplex Operation – 1 pump installed, only pump 1 will run. Pump 2 is disabled.
Number
of Pumps
Running
Current
Pump
Beep
Open Remote
Alarm Contacts
LCD
Updates
Locked Out
*
Bad
‡
1
Extreme X X X X
High, 3 Times X X X X
High X X X X
Low X X X
*
Duplex Pump Mode or pump is permanently locked out from running until controller is reset.
†
Running two pumps simultaneously is temporarily disabled; that is, one pump is turned off.
‡
Pump is only run as a lag (secondary) pump.