Product Manual

Check for parts online at www.ioniceaugers.com or call 800-345-6007 M-F 8-5 CT
8
Operator's Manual
ION® Electric Ice Auger
MAINTENANCE ITEM
Before each
day’s use
Every 500
complete
charges Yearly
Check bolts and nut X
Battery Charge X
Replace X
Sharpen/Replace Blades X
IMPORTANT
CONNECT THE BATTERY TO THE CHARGER EVERY
THREE MONTHS TO ENSURE THAT IT MAINTAINS
A FULL CHARGE DURING EXTENDED STORAGE.
Transporting Your Ice Auger
• Remove the battery if transporting the auger.
Long-Term Storage
If your ice auger will not be run for more than one month,
prepare it for long-term storage.
1. Charge the battery and leave it o of the unit. DO NOT
leave the battery on the charger. Store the battery in
temperatures between 40˚ F- 120˚ F.
2. Remove the auger from the powerhead and apply a thin
layer of grease to the driveshaft. SEE FIGURE 7
3. Remove all debris from auger and powerhead.
4. Attach the blade protector to bottom of auger.
5. Keep in a dry, moisture-free area.
MAINTENANCE AND STORAGE
Read the maintenance schedule and observe these
recommendations to extend the life of your electric auger.
Good maintenance is essential for safe, economical, and
trouble-free operation. To help you properly care for your
powerhead, the following pages include a maintenance
schedule, routine inspection procedures, and simple
maintenance procedures using basic hand tools. Other service
tasks that are more difficult, or require special tools, are best
handled by professionals and are normally performed by a
technician or other qualified mechanic.
The maintenance schedule applies to normal operating
conditions. If you operate your powerhead under unusual
conditions, such as sustained high-load, or use in unusually
wet conditions, consult ION® customer service for
recommendations applicable to your individual needs and use.
Maintenance and Schedule
POWERHEAD
DRIVESHAFT
PROTECTIVE CAP
BOLT
HEX WRENCH
AUGER
11474-0010R1
FIGURE 7