Quick Start Guide

Charging

For fastest charging, power off Glow Stone Solar and use the included micro-USB cable to

connect the speaker to (A) a USB power adapter (DC 5V; sold separately) connected to a

power outlet, or (B) your computer (powered on).

Glow Stone Solar's battery life can also be prolonged between charges using the solar panel.

For best results, place Glow Stone Solar in an area that receives at least 3 hours of direct

sunlight a day.

The rate of charging depends on the amount of sunlight the solar panel

receives. The unit will charge slower when receiving indirect sunlight.

Features

Side Panel

1. Bluetooth LED: The LED will

flash blue when in Bluetooth

pairing mode. The LED will be lit

solid blue when connected to a

Bluetooth device.

2. Power/Linking: Hold this button

for 2 seconds to power Glow

Stone Solar on and off. See

Linking Two Glow Stone Solar

Speakers for more details.

Light Modes:

Short press and release the Power button to cycle through colors (white/red/blue/green).

Each color has a solid state and an active state. When active, the LED will slowly fade in

and out, and if music is playing, the LED will flash to the beat of the music.

Note: Power off the unit after use in order to conserve the battery.

3. Micro-USB Charging Port: Insert the included charging adapter here to charge the Glow

Stone Solar battery.

Note: A solid red LED will appear to indicate that the speaker is charging. When charging

is complete, the red LED will turn off.

Note: If you experience the music cutting out at loud volumes, this is an indication that

the battery is low. To avoid experiencing audio cutting out while the product’s battery is

at a low state of charge: decrease the volume, and/or charge the battery.

4. Aux Input: This stereo 1/8” (3.5 mm) input can be used to connect a CD player, MP3

player, or other audio source.

Note: Audio from the auxiliary input will not be transmitted to a linked speaker.