Quick Start Guide

ManualsBrandsION ManualsBluetooth SpeakersION Party Time

Diagram and Parts Description

1. Auxiliary Input: This stereo 1/8” input can be used

to connect a smartphone, MP3 player, or other audio

sources.

2. Bluetooth: The Paired LED will be lit when a device

is paired to PARTY TIME. This LED will not be lit

when PARTY TIME is first powered on (unless it was

previously paired with a device). Press the Disconnect

button to disconnect a paired Bluetooth device.

3. Master Volume Control: This adjusts the speaker’s

main mix volume, which includes Microphone Input,

Auxiliary Input, and the audio of a paired Bluetooth

device.

4. Power LED: Indicates whether PARTY TIME is on or

off.

5. Party Light Button: Press this button to turn the lights

on/off.

6. Dome: The lights in the dome can react to the music

playing.

7. Power Input: The integrated power cable is connected

here.

8. Power ON/OFF Switch: Turns PARTY TIME on or off.

9. Air Vents: These vents ensure the light dome operates

efficiently.

Note: Please ensure these vents do not get covered or

blocked.

Troubleshooting

If the sound is distorted: Try lowering the volume control of your sound source or musical instrument. Also,

try to reduce the overall volume of PARTY TIME.

If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass

level. This will allow you to play the music louder before clipping (distortion) occurs.

Connecting with a Bluetooth Device

1. Turn on PARTY TIME using the power switch.

2. Navigate to your Bluetooth device’s setup screen, find “Party Time” and connect.

Note: The next time you approach PARTY TIME with your Bluetooth device, it will automatically re-

connect.

Note: If your Bluetooth device prompts for a pairing code, enter ‘0000’.

3. If your Bluetooth device is not able to connect to PARTY TIME, press the Bluetooth Disconnect button

on PARTY TIME to break previous Bluetooth connections and reset the Bluetooth module.

Note: Maximum range will be achieved when using devices with Bluetooth 4.0.

4. The Paired LED will light up solid when it is 'paired'.

5. Start music playback from your Bluetooth device.

6. To connect to another Bluetooth device, press the Bluetooth Disconnect button. Repeat Step 2.

7. To disconnect a connected Bluetooth device, press the Bluetooth Disconnect button.

Note: If you experience trouble connecting or playing music, update your device's OS.

*WARNING: Do not look directly into the

dome light. Do not sit, stand, or apply

pressure on the dome light.