User's Manual

Key definition
1) Left Click
2) Right Click
3) 360° Scroll
ID Setting
The product has been pre-set and the mouse and dongle receiver are already paired.
It is not necessary to do the ID setting when you use the mouse for the first time.
However, the connection may be lost due to RF interference of environment. Hence,
it may be necessary to re-set the connection ID. Please follow the process below for
the ID setting.
Step 1: Unplug and then plug the dongle receiver into your computer. For the best
performance, please plug the dongle receiver into the front USB port of your
computer, or use the USB extension cable to place the dongle receiver 20cm
away from monitor, speaker, power supply, USB hub and other RF
interference sources.
Step 2: Press the connect button on the dongle receiver. The LED will start to blink.
Step 3: Press the connect button on the bottom of the Wireless Mouse within 8
seconds after Step 2.
Note: 1. If the Wireless Mouse does not work properly, please go back to step 1.
2. If the ID is used by other users or devices, please go back to step 1.
Reminder: For optimal performance, please place the dongle receiver 20cm away