Assembly Instructions

3 303658 Tape, Acrylic adhesive transfer tape 9082,
Clear
A Tape, Ultra High Temperature Acrylic
adhesive transfer tape 9082, Clear, UL file
MH17478, Maximum operating temperature
120C
1 AR Tape1 As required. For positioning parts before
potting
2 740-00018 E Series Battery Pack Serialization A Drawing defining the requirements for serial
numbers for E series battery packs
1 EA 0 N/A
Serial number includes supplier number and
code for battery manufacturer
1 303429 Enclosure Lid, ExX E Enclosure Lid, ExX 1 EA 2 IS Part
1 303430 Enclosure Base, ExX B Enclosure Base, ExX 1 EA 1 IS Part
1 303446 Screw, Plastite 48-2, 6-19 x .38, Pan Head,
Torx, 18-8 SS
A Screw, Plastite 48-2, 6-19 x .38, Pan Head,
Torx, 18-8 SS
6 EA 9
1 303456 Label, IS-Warning, E Series, French C Label, IS-Warning, E Series, French 1 EA 32 IS Part
1 303457 Label, IS, Substitution Warning, French B Label, IS, Substitution Warning, French 1 EA 31 IS Part
1 303458 Label, IS, E-Series E Label, IS, E-Series 1 EA 30 IS Part
1 303493 Imprint Spec, Label, Serial Number B Imprint Spec, Label, Serial Number 1 EA 17 IS Part
1 303550 Intrinsic Safety Manual E-series CMU Q Intrinsic Safety Manual, E4S, E5S, E4X,
E5X, E6S
1 EA 27 IS Part User Manual One copy per shipment
1 303551 Label, IS-Warning, E Series C Label, IS-Warning, E Series 1 EA 15 IS Part
1 303586 O-Ring, 3/32 Thk x 8-3/16 ID, 30
Durometer, Silicone
A O-Ring, 3/32 Thk x 8-3/16 ID, 30
Durometer, Silicone
1 EA 4 IS Part
1 303589 Breather, GoreTex, 14mm dia, self
adhesive, Black
A Breather, GoreTex, 14mm dia, self
adhesive. Continuous operating
temperature -40C to 100C. UL file E332853.
1 EA 3 IS Part
1 XX = 06 Option PCBA, EMU, XX = 06 Option C
This is the PCBA for the Primary Cell Phone
Communication Type, with the Smart Mesh
Internet Protocol Manager Option Installed
and SMIP E6 Mote daughter board
installed.
1 EA 5 IS part
2 PCBAC3-06-NA-4-0-1 PCBA, EMU, E6 4G/2G GG0 NA
Configuration
A This is the PCBA for the E-series CMU-E6,
Primary Cell Phone, SMIP Manager and
Mote, North American SIM, 2G/4G Cell
Modem, Giant Gecko Rev 0, and External
memory populated.
1 EA E-series CMU-E6, Primary Cell Phone,
SMIP Manager and Mote, North America
SIM, 2G/4G Cell Modem, Giant Gecko Rev
0, and External memory populated
3 PCBAC3-XX-UU-T-P-M PCBA, CMU3, Main Board w/ options D PCBA, CMU, Main Board w/ options XX is
Aux Comm UU is SIM card Installation T-
cell modem chip P - processor M - memory
1 EA PCBA to be assembled per options defined
in Item part number
4 128M Flash Option U210 or U211 - NOT
Both
IC FLASH 128M 133 MHz B Stuff either U210 or U211. Other part is
NOPOP.
1 EA 67 Two footprints - only one gets stuffed
4 300291 Sealant, Silicone-Fast Tack 3165 Grey A Old P/N 415-00002, Continuous operating
temperature -45C to 200C. UL File E40195.
1 AR 40 RTV Seal around and over C611 and L720 to
trap air inside part.
4 300795 Cap, MLC, 1uF, 16V, X7R, 0805, +/-10% D 2 EA 6 C701, C725
4 300800 CAP CER 47UF 16V 20% X5R 1210 D 3 EA 7 C342, C700, C724
4 300810 Diode, Schottky, 20V, 2A, SOD-323 B 1 EA 33 D720
4 300816 Inductor, 4.7uH, 5.6A, 20%,
10.2x10.2x4.5mm
C metal composite, shielded 1 EA 59 L720