Installation Manual

_____________________________________________________________________________________
303550 Installation Manual E-Series CMU Confidential
Revision Date: 14-Apr-2020 Revision: S
Process Owner: Engineering Page 4 of 36
3. Powering on the CMU
Note: The CMU was powered down for shipping and must be powered on before TARA
association and mounting to asset.
1. If the device has a red label on the top of the case, the CMU device is powered on by
removing the red label and magnet. Set the magnet and red label aside for use after
mounting.
2. CMUs without magnets and red labels are configured to be powered on using a Near
Field Communication (NFC) reader (supplied by ADS). The ADS Windows
applications (CoreMessaging or CoreProvisioning) must be used to power on the
CMU.
WARNING: The NFC tag reader must not be used in potentially explosive
atmospheres. If using the NFC tag reader, power on the CMU in a non-
hazardous area.
ATTENTION: Le lecteur d'étiquette NFC ne doit pas être utilisé dans des
atmosphères potentiellement explosives. Si vous utilisez le lecteur
d'étiquettes NFC, mettez la CMU sous tension dans une zone non dangereuse.