Installation Manual

_____________________________________________________________________________________
303550 Installation Manual E-Series CMU Confidential
Revision Date: 14-Apr-2020 Revision: S
Process Owner: Engineering Page 5 of 36
4. Associating the CMU to an asset
Use the TARA web site to associate the CMU to an asset.
Navigate to the website below and log in using the supplied credentials
https://portal.amsteddigital.net/IonxliveMassTARA/Default.aspx
Note: If you receive the error message ‘Invalid User Name / Password.’, please contact
Support Center at ADS to enable TARA access.
North America: 1-800-621-8442 [e-mail]
Europe: [phone] [e-mail]
1. After logging in, you should see the following screen. This is the ‘Install’ tab for use when
installing a device on a new asset. If replacing an existing CMU on an asset, please see
the Uninstall instructions in section 7.A.1.
The existing CMU must be uninstalled prior to associating the new CMU.
2. If installing only one device, fill in the serial number of the CMU getting installed, the car
mark and number (AAR format: ABCD 123456, with a separating space and leading
zeros for numbers with less than 6 digits), and choose the customer name and fleet from
the dropdown. Press the ‘Install’ button to record the association.
Note: European customers may enter the asset name in the European
numeric format (12 12 1234 123-1)