User's Manual

16
Figure 17. Balance a telescope
CAUTION: The balancing process MUST be done with Gear Switch at the total disengaged position!
Otherwise it might damage the worm system.
Return the mount to Zero Position after balancing and engage gear switches.
Step 9. Connect cables
Use the short RJ11 cable to connect the DEC control unit to the DEC port of the RA control unit.
Figure 18. Connect DEC cable
Connect the Go2Nova
®
8409 Hand Controller to the HBX port on the RA unit. Plug in a 12V DC power
supply to the DC12V IN socket next to the HBX port (NOT the DC12V OUT on the other side).
Figure 19. Ports for cables