Iota DLS-240-30 Specifications

IOTA REV 050511
DESCRIPTION
TECHNICAL SPECIFICATIONS
IOTA ENGINEERING
DLS-240-30
PRODUCT SPECIFICATION SHEET
DC Output Voltage (No Load) approx.
Output Voltage Tolerance (No Load)
Output Amperage, Max Continuous
Output Voltage (Full Load) approx.
Maximum Power Output, Continuous
Ripple and Noise
Input Voltage Range
Input Voltage Frequency
Maximum AC Current (@216VAC)
Typical Efficiency
Max Inrush Current, Single Cycle
Short Circuit Protection
Overload Protection
Line Regulation
Load Regulation
Fan Control*
Thermal Protection
Working Temperature Range
Storage Temperature
Withstand Voltage**
Dimensions
†
Weight
13.6V (DC)
+ or - .7%
30 Amps
>13.4V (DC)
400 Watts
<50 mV rms
216 - 264 AC
47-63
3.7 Amps
>80%
30 Amps
Ye s
>100%
100 mV rms
<1%
Proportional
YES
0° - 40° C
-20° to 80° C
1700/1700/500
9.7″ x 6.7″ x 3.4″
5.0 lbs
The DLS-240-30 battery charger/power converter from IOTA Engineering converts nomi-
nal 240V A.C. voltage to 13.4V D.C. As a power supply, its tightly controlled regulation
allows the user to operate any appropriate nominal D.C. load up to the converter’s rated
output current. As a battery charger, the DLS-240-30 will maintain the battery, delivering
its full-rated current when the battery capacity falls sufficiently low. The voltage is set
to deliver its maximum current for the necessary period of time that minimizes undue
stress to the battery caused by heating of its cells. This helps to ensure the longest
possible life of the battery. Over time, as the battery nears its full capacity, the converter
will float-charge the battery to prevent self-discharge of its cells.
240VAC - 12VDC CHARGER/CONVERTER
*Proportional = Fan speed proportional to case temperature.
**Primary to Chassis/Primary to Secondary/Secondary to Chassis
†
See reverse side for detailed mounting specifications.
P.O. BOX 11846 TUCSON, AZ 85734
[phone] • FAX [phone]
www.iotaengineering.com
PRODUCT OVERVIEW
DC Output Voltage
Output Amperage
Input Voltage Range
Input Voltage Frequency
13.4V (DC) @ Full Load
30 Amps
216-264 VAC
47-63 Hz
APPLICATION
Charging for 12V Battery Systems and Operation of
12VDC systems and accessories from a 240VAC supply.
FEATURES
Switch-mode technology
Current limit, thermal and overload
protection
Lower operating temperature
Clean and steady DC Output operates
your loads the way they were intended,
avoiding potential damage to systems
from errant DC voltage.
Built-in protection features guard
the unit against erratic line voltage
that can occur from shore power or
generator supplies.
Reverse Polarity Protection to protect
against damage from incorrect battery
hook-up, using readily available fuse
types that are easy to replace.
Proportional fan control for
whisper-quiet operation.
ADDITIONAL FEATURES INCLUDE...
Compatible with IOTA IQ
Smart Charger for automatic
four-stage charging.
Charging Jack option for normal
and high-stage battery charging
applications.
Covered by IOTA with a full
two-year warranty.