Data Sheet
Table Of Contents
- 1 Introduction
- 2 Summary
- 3 Block schematic
- 4 Development environment
- 5 Features
- 6 Pin assignment
- 7 Regulatory compliance
- 7.1 CE certification (Europe)
- 7.2 FCC (USA) and IC (Canada)
- 7.2.1 FCC Part 15 compliance statement
- 7.2.2 ISED - Industry Canada Licence-Exempt Radio Apparatus
- 7.2.3 ISED - Industrie Canada appareil radio exempts de licence
- 7.2.4 Radio Frequency (RF) Exposure Compliance of Radio communication for mobile Apparatus
- 7.2.5 Conformité à l’exposition aux champs RF des équipements radio mobiles
- 7.2.6 End Product Labeling
- 7.2.7 End Product User’s Manual:
- 8 Mechanical characteristics
IoTize™ offers a complete solution for instant integration of wireless connectivity that links
electronics to mobile devices and the Cloud. This solution is inspired by the advantages of
adding network connectivity without redesigning existing systems or recoding their firmware. It
supports integrators with software and features for instant creation of customized Human
Machine Interfaces (HMI) that run on mobile devices, configurable access control, security and
Cloud integration.
The TapNLink™ line uses technologies and techniques that are typically reserved for system
programming and debugging to connect directly the target system’s microcontroller. This unique
approach makes it possible to add connectivity without redesigning the system. It speeds
integration, eliminates risks and delivers design flexibility through encapsulation of complex
wireless communication, network and security technologies. This facilitates the initial
integration, but also makes it possible to easily evolve the wireless connection to meet future
needs or technology evolutions... and still without ever recoding the system's original software.
TapNLink provides fully qualified wireless implementations. These allow local connection to
mobile devices (smartphones, PDAs, tablets, PCs, etc.) allowing users to monitor or update a
system and transfer data to the Cloud if/when necessary. Depending on the connectivity
channels on the module, TapNLink can also enable connection to WAN or LPWAN for remote
supervision and remote access control from the Cloud.
For the embedded application, TapNLink enables:
Mobile device-based HMI
Data transfer to the internet
TapNLink provides software and hardware encapsulation of the mobile device / target
application communication. It manages communication with:
Target application via hardware module RF interface(s) and communication co-
processor
Mobile devices via a low-level service application
TnL-FIW103 Datasheet 4