User's Manual

Proprietary & Confidential Information
iotTech Corporation, Taiwan
Doc. NO:
ITM-FCC3F1 Datasheet
2. Linker label does not need to select “use Memory layout From Target Dialog” option.
Scatter File document needs to be set up, as shown in Figure 8. By clicking button, this Scatter
File can be opened up.
Figure 8: Scatter File
3. Debug label does not select “Load Application at Startup” option, but the content of “initialization
File” needs to be set up, as shown in Figure 9, and if there is need to understand the content of “ini”
further, click “ ”, and open “ini” document.
Figure 9: debug Setup
Note: In view of the importance of “ini” between patch code and ROM code, it is recommended NOT to
modify the content of this document; otherwise it may result in abnormal operation of the codes.