Easy One Touch 4 Wireless Dash & Windshield Mount • Support pour tableau de bord et pare-brise • Supporto telefono per parabrezza e cruscotto • Armaturenbrett und Windschutzscheibenhalterungt • Montaje de tablero y parabrisas Manual • Guide • Manuale • Handbuch • Manual
Getting Started For optimal mounting and charging, please follow the detailed instructions within this manual when using the Easy One Touch Wireless Charging Mount. iOttie is not liable for possible damages due to product misuse. Critical Information At a Glance Cradle Knob Telescopic Arm Telescopic Knob Easy One Touch Trigger Button Micro USB Port Foot Knob Compatibility Before using product, make sure your device is Qi Wireless compatible.
Qi Alignment Guide Wireless Charger Specifications INPUT 5V/2A, 9V/2A, 12V/1.5A CHARGING PORT MICRO USB LENGTH 6.0" WIDTH 4.4" HEIGHT 4.3" WEIGHT 6.4oz Smartphone charging. Smartphone not charging. Blinking Red Light For optimal wireless charging, please make sure your smartphone and mount’s Qi coils are aligned. Easy One Touch Wireless Foreign object detected or overheating of mount or smartphone.
Installation Option B Windshield Installation or Curved Glass Installation 1. Assembling the Mount Choose a location on the windshield and wipe any dust or debris from the surface. STICKY SUCTION CUP A. Connect the Mount Cradle with the Ball Joint. B. Then, tighten the Cradle Knob. 2. Selecting a Location Choose an installation method: Dashboard/Flat Surface (A) or Windshield/Curved Glass (B). Choose an area on a flat surface and wipe any dust or debris from the surface. STICKY SUCTION CUP 2.
Using the Easy One Touch Mechanism Adjusting the Mount The Easy One Touch lock and release mechanism makes it simple to mount & retrieve smartphones in seconds. Mounting 1. Press the locking side arms in. 1. Cradle Knob 2. Foot Knob When mounting in landscape mode, loosen to rotate the Cradle. Tighten to lock in desired position. Located on the lower back of Cradle. Loosen to re-position mount’s foot. The Foot can be adjusted up & down or side-toside. 3. Telescopic Knob 4.
Declaration of Conformity (FCC) Operational Warnings During the charging process, the transfer of electricity gives off heat. Your device may become warm, but should not become exceedingly hot. If the device gets wet, please cease charging immediately. Remove all plugs and dry the product completely. Device is only to be operated in a dry, indoor environment. Please be careful of excessive drops, dents, punctures, or deformities on the device.
Hiermit erklärt iOttie, dass sich diese in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 2014/53/EU befindet. Die EG-Konformitätserklärung kann hier heruntergeladen werden: https://www. iottie.