Users Manual
Table Of Contents
Installation
1. Peel o the protective film on the
Suction Cup and press firmly onto
the windshield.
A. Connect the Mount Cradle with
the Ball Joint.
Choose an installation method: Dashboard/Flat Surface (A) or
Windshield/Curved Glass (B)
Choose an area on a flat surface on the vehicle’s dashboard
and wipe any dust or debris from the surface.
Choose a location on the windshield and wipe any dust
or debris from the surface.
B. Then, tighten the Cradle Knob.
2. Push Locking Lever down to
engage suction.
2. Selecting a Location
1. Assembling the Mount
Option A
Dashboard or Flat Surface Installation
Option B
Windshield Installation or Curved Glass Installation
2. Peel o the protective
film on the Suction Cup
and press mount firmly
onto the dashboard pad.
3. Push Locking Lever
down to engage
suction.
Connecting Power
The Easy One Touch Connect is powered via a micro-USB cable. There is no o/
on switch on the device. Once it is plugged in, the device will remain on unless the
vehicle shuts o power when in parking mode.
1. Plug the micro-USB cable into
the USB port on the back of the
Mounting Head.
STICKY SUCTION CUP
STICKY SUCTION CUP
2. Insert Car Charger into your
vehicle’s power port.
1. Peel o the film
on the dashboard
pad & stick on the
desired installation
location.