Installation Instructions

nano3G AP Installation Manual Pre-Provisioning a nano3G AP
N3G_INST_300 v8.1 for N3G_2.0.5 © ip.access Limited 2011 Page 22
Select a File Automatically Backed Up on the OMC-R Server
12) Click the radio button for From auto backup, then click the browse button on the
right. A list of files automatically saved on the OMC-R server will appear. For
example:
13) Click the required file in the list, then click Load. The list will close and the file
name will be shown in the box for Auto backup file.
3.1.4 Enter AP Identification Details
14) Click Next. The page for specifying AP identification details will appear:
15) Click in the Site ID box and type a numeric ID. This must be unique within the
parent AC Detail object. As the ID number is entered, the Site Name is set
automatically.
16) If required, click in the Site Name box and type any text to replace the default Site
Name. Enter text that will help identify this site.
17) Click in the 3G AP Equipment Identity box and enter the serial number for the AP.
This must be an exact match for the AP’s serial number. If this does not match, the
AP Management System will not allow the AP to connect.