User's Manual

nanoLTE E40 AP Product Description Product Details
NANO_GST_43310 v101_0.5 for N4G_1.1 © ip.access Limited 2016 Page 6
3.5.3 Physical Interfaces
The following physical interfaces are presented on the enclosure panel:
• DC power jack
• RJ45 Ethernet (LAN)
• 2 x SMA female RF
• Reset Switch
• GPS Antenna Port (inactive)
3.5.4 Antennas
When used in SISO mode, it is possible to have one antenna for the Tx path and one
antenna for the Rx path. The nanoLTE E40 AP has 2 antenna elements housed internally
within its external plastic enclosure. These are directly connected to the main PCB
assembly by means of SMA connectors. The connectors present duplex transmit and
receive RF signals for each port.
External antennas, for example panel antennas, can be connected instead of the supplied
components. This can be achieved by removing the antenna cover, which allows direct
access to the SMA connectors for cabling.