Manualshelf

Installation Manual

ManualsBrandsip.access ManualsElectronicsGSM/GPRS/EDGE/AMR picocellular base station operating at 1900MHz.
31323334353637383940
nanoBTS Installation Manual
Commission a nanoBTS
© ip.access Ltd Page 30
6. On the DHCP tab, select the Enable DHCP Configuration check box.
7. On the DHCP tab, enter the Subnet Mask and IP Address of the gateway router if
required.
8. Click OK. The DHCP field in the BTS Status section should turn green. If not,
ensure that the DHCP server is running.