Product Description

nanoBTS Product Description Customer safety and regulatory information

The PSU109 is supplied by Poly-Products Industries, model number ILA1711112.

A copy of regulatory compliance documentation may be obtained in writing from:

"IP access Ltd, Building 2020, Cambourne Business Park, Cambourne, Cambridge, CB23

6DW, UK".

8.3 Model 126 Ethernet Switch and Power Inserter

8.3.1 126 - Handbook - Warnings and Cautions

This document is written in English.

Please request a copy in your local language if required.

This product is only intended to power products approved by IP Access.

Ensure that only IP Access approved products are connected to an Ethernet

circuit enabled for 48V operation, this also applies to outlets remote from the unit.

To be located in a restricted access location only (accessible to maintenance

personnel only).

For indoor use only, output cabling is SELV / LAN for indoor routing only.

Do not block ventilation holes or otherwise impede cooling.

Refer to National Engineering Code (USA). Wiring methods must be in

accordance with NEC Article 300.

When rack mounting, secure via front panel plate with 4 bolts and ensure that no

additional load is placed upon the caseworks (e.g. heavy objects on top).

When rack mounting, ensure that the internal rack temperature does not exceed

the rating of this product.

Do not apply power to unit if there is any evidence of condensation.

Do not open casing as mains voltages may be present within the unit.

AC inlet cable must carry suitable local approval (e.g. UL marking for US and

Canadian markets).