User's Manual

APPENDIX B: BASE STATION PARAMETERS
©2005 IMobileNet, Inc. Revision & Copyright HSBS User Manual
516.80540.UM-Rev. D 1-Jun-07 Page 30 of 38
BASE STATION PARAMETERS
PARAMETER DESCRIPTION / VALID VALUES DEFAULT
? Displays base station settings.
12dB SINAD
Valid Values:
0 to -135 (Calibrate RSSI @ 12 db SINAD)
30dB S/N
Valid Values:
0 to 135 (Calibrate RSSI @ 30 db S/N)
40dB S/N
Valid Values:
0 to 135 (Calibrate RSSI @ 40 db S/N)
-40dBm
Valid Values:
40 (Calibrate RSSI @ -40 dBm)
base station number
Unique number assigned to the base station.
Valid Values: 0 to 999
0
carrier detect delay time Valid Values: 1 to 20 (unit in ms) 5
channel
Selects the operating frequency channel, where “x” is
the channel number.
Valid Values: 0 to 49
0,voice,data
comparison frequency 400000
default gateway
Default gateway address only needed if the base
station is not on the same subnet as the IPNC.
Valid Values: xxx.xxx.xxx.xxx (xxx=0 to 255)
0.0.0.0
Ethernet address
Valid Values:
00:08:CE:XX:XX:XX (XX=hexadecimal byte value)
00:00:00:00:00:00
frequency
Sets transmit and receive frequency for the channel.
A maximum of 50 channel frequency combinations
may be entered. These settings will change
depending on the frequency range of the base.
Valid Values: n, tx, rx (n=0 to 49, tx=100.0 to 999.0,
rx=100.0 to 999.0)