Installation Manual
Table Of Contents
- IPSeries Mobile Radio User Manual
- Document Revision Control
- Table of Contents
- Manual Components
- Chapter 1: Introduction
- Chapter 2: Basic Network Configuration
- Chapter 3: Setup and Configuration Scenarios
- Chapter 4: Production Installation
- Installation Overview
- Installation Instructions
- Post Installation Checklist
- Preliminary Testing and Troubleshooting
- Preliminary Test Procedure and Troubleshooting
- Chapter 5: Programming Instructions
CHAPTER 3: SETUP AND CONFIGURATION SCENARIOS
2003 IPMobileNet, Inc. 16 IPSeries MR User Manual / Rev. A / 08-Apr-03
Mobile Radio-to-VIU-to-Mobile Computer Setup
Figure 8: Mobile Radio-to-VIU-to-Mobile Computer Setup
To setup a mobile radio-to-VIU-to-mobile computer configuration, additional components are required, as
listed in Table 5:
TABLE 5: MOBILE RADIO-TO-VIU-TO-MOBLE COMPUTER COMPONENTS
REQUIRED FOR INSTALLATION
QTY DESCRIPTION
1 IPM Mobile Radio
1 Mobile Computer
1 Voice Interface Unit (VIU)
1 20-foot serial cable (DB9F – DB9M)
1 10-foot serial cable (DB9F – DB9M)
1 Mobile Radio SLIP Port Driver Installation Diskette
To configure the mobile radio, the voice interface unit, and the mobile computer for this type of
setup, follow the instructions on pages 18 and 19 in the Mobile Computer Setup for
Communication with the Mobile Radio Installation Guide (IPMN p/n: 516.80310.IG) available on
the Product Documentation CD.