Installation Manual
Table Of Contents
- IPSeries Mobile Radio User Manual
- Document Revision Control
- Table of Contents
- Manual Components
- Chapter 1: Introduction
- Chapter 2: Basic Network Configuration
- Chapter 3: Setup and Configuration Scenarios
- Chapter 4: Production Installation
- Installation Overview
- Installation Instructions
- Post Installation Checklist
- Preliminary Testing and Troubleshooting
- Preliminary Test Procedure and Troubleshooting
- Chapter 5: Programming Instructions
CHAPTER 4: PRODUCT INSTALLATION
2003 IPMobileNet, Inc. 17 IPSeries MR User Manual / Rev. A / 08-Apr-03
Installation Overview
This chapter provides the basic steps involved in the installation process of an IPSeries Mobile Radio.
This chapter includes wire routing and connections between the mobile radio, other components, and the
vehicle’s power.
1 To prevent personal injury and vehicle damage, exercise extreme caution throughout the
installation process and follow the reminders listed below.
Follow safety precautions for handling wiring, tools, and a vehicle’s engine.
Handle the vehicle’s battery with extreme caution to avoid burns.
Do not
alter the components listed in the Installation Requirements section below, unless
substitutions are noted within this chapter.
Once the antennas are installed
, as directed within this user manual, all persons must
maintain a distance of no less than 39 inches from the antennas.
Installation Requirements
Table 6 lists the documents required to successfully install the mobile radio and connect to the various
components within the vehicle:
TABLE 6: DOCUMENTS REQUIRED FOR MOBILE RADIO INSTALLATION
DESCRIPTION PART NUMBER
The following documents are available on the Product Documentation CD
enclosed in the shipment with the mobile radio:
480.0001.001
IPSeries Mobile Radio User Manual 516.80495.UM
Installation Guide for Mobile Computer Setup for Communication with
the Mobile Radio
516.80310.IG
Confirming Mobile Radio Receiver Sensitivity TN01-0027