User Manual
Table Of Contents
- INVADR Mobile Radio Installation Guide
- Mobile Radio Illustration
- Installation Overview
- Safety Reminder
- Installation Requirements
- Installation Instructions
- Pre-Installation Guidelines
- Mounting the INVADR Mobile Radio
- Serial Cable Connection and Routing
- EMI Filter Installation
- Radio Power Supply Installation
- MDC Power Supply Installation
- Carling Switch Installation
- Delay Timer Installation
- Antenna Installation
- VIU Connections
- INVADR Mobile Radio Testing
- Installation Checklist
- Vehicle Unit Wiring Interconnection Layout
- Mobile Antenna Distance Matrix
- Diversity Antenna Mobile Installation Detail
- Vehicle Unit Wiring Interconnection Layout - with VIU
- Vehicle Unit Wiring Interconnection Layout - Data911 w/ VIU
~\Technical Documentation\Install_Guides\MR-Guide\3-Jan-02 Page 2 of 14
INVADR
tm
Mobile Radio Illustration
Installation Overview
This guide will provide standard steps involved in the installation process of an INVADR
tm
Mobile Radio. This
guide includes wire routing and connections between the radio, other components, and the vehicle’s power.
Safety Reminder
1. To prevent personal injury and vehicle damage, exercise extreme caution throughout
this installation process.
Follow safety precautions for handling wiring, tools, and a vehicle’s engine.
Handle the vehicle’s battery with extreme caution to avoid burns.
Do not alter the components listed in the Installation Requirements on page 3
unless substitutions are noted within this document.
Once the antennas are installed, as directed within this guide on page 8 of 14, all
persons must maintain a distance of no less than 39 inches from the antennas.
Black
Red
TX/RX1 RX2
Serial Cable
DB9
Power Cable
Mounting
Bracket
TX FCC ID M17-EC8DT450TX
xxxxxxxxxxx
xxxxwweddd
xxxxxxxx
xxxxwweddd