Installation Manual

~\Technical Documentation\Install_Guides\MR-Guide\4-Mar-04 Page 10 of 16
Installation Checklist
Throughout the installation process and once the
installation is complete, make sure to perform the
following tasks:
 Thoroughly scope out the vehicle to find any obvious problem
areas.
 Check wiring for safety concerns.
 Use tie wraps to ensure that all wires routed in parallel are
bundled together.
 Check to see if any wires are exposed.
 If any wires are exposed, use electrical tape to cover.
REMINDER
: When covering wires in the engine compartment,
use high-quality electrical tape.
 Perform appropriate testing as described in this guide to
ensure radio works properly.
 Once installation is completed, remove all debris and restore
dismantled parts and rubber mats to appropriate locations.