User's Manual

SECTION 4: FACTORY TEST PROCEDURE
M64450G25-FCCRpt.doc Page 41
Final Inspection
The final inspection of the mobile radio is a critical step that translates directly into confidence in the
product. Several areas must be checked on every base station before it can be shipped:
 Screws- every screw hole must have the proper screw tightened the proper amount. The screws must
be new and cannot have rounded shoulders. Screw heads must be flush to the case.
 Connectors- all screws must be tight and the internal portions of each connector must not be
damaged.
 Covers and panels must not be dented or unduly scratched.
 Initial traveler after completion of Final Inspection.