User's Manual

APPENDIX B: M64450G25 TEST DATA SHEET
M64450G25-FCCRpt.doc Page 45
Receiver Calibration
Parameter Specification
Receiver 1
Measured
Receiver 2
Measured
"Noise" value reported with -95dBm signal injected
-95 +
2 dBm
"Noise" value reported with -105dBm signal
injected
-105 +
2 dBm
Transmitter Output
Parameter Specification Measured
Transmitter Frequency Error (Frequency controlled by software; record
measured value)
+
400 Hz
Transmitter Modulation (Deviation)
4.8 kHz +
75 Hz
Output Power at 13.8 vDC
40 watts
Transmitter Data Quality
Parameter Specification Measured
Data Quality
≥ 220 for 50
contiguous
plots
Message Success Rate
≥ 94% for 50
contiguous
plots
Final Inspection
Item to check Check for Initials
Receiver selection function Correct Rx LED lights when receiving on its port
Visual inspection
Screws, connectors, jack screws, switches,
overlay, no rattle
LED Lock light illuminates when power is applied
Attach copy of all firmware settings Completed