User's Manual

SECTION 3: INSTALLATION INSTRUCTIONS
M64450G25-FCCRpt.doc Page 6
Installation Overview
This chapter provides the basic steps involved in the installation process of an IPSeries High Speed
Mobile Radio into a vehicle. This chapter includes wire routing and connections between the mobile
radio, other components, and the vehicle’s power.
a
To prevent personal injury and vehicle damage, exercise extreme caution throughout the
installation process and follow the reminders listed below.
 Follow safety precautions for handling wiring, tools, and a vehicle’s engine.
 Handle the vehicle’s battery with extreme caution to avoid burns.
 Do not
alter the components listed in the ‘Installation Requirements’ section below, unless
substitutions are noted within this section.
 Once the antennae are installed
, as directed within this user manual, all persons must
maintain a distance of no less than 39 inches from the antennae while the mobile radio is in
the transmit mode.
Installation Requirements
The table below lists the documents required to successfully install the mobile radio and connect to the
various components within the vehicle:
TABLE 3: DOCUMENTS REQUIRED FOR HIGH SPEED MOBILE RADIO INSTALLATION
DESCRIPTION PART NUMBER
 M64450G25 High Speed Mobile Radio Product Owner’s Manual 516.80528.POM
 Installation Guide for Mobile Computer Setup for Communication with
the Mobile Radio (available on the Product Documentation CD, IPMN
p/n: 480.0001.001).
516.80310.IG