Installation Guide

MDCMR-Guide.doc\4-Sep-03 Page 2 of 20

Mobile Data Computer-to-Mobile Radio Illustration

Installation Requirements

Mobile Radio-to-MDC

• MDC (Mobile Data Computer) with an available serial communication port and Windows 98

or greater installed

• IPMobileNet (IPMN) IPSeries Mobile Radio

• 20-foot serial cable DB9F – DB9M (BlackBox p/n: EDN12J-0020-MF) to connect MDC to the mobile radio

• IPMobileNet Radio SLIP Port Driver Installation diskette (SLIP2IPMN.exe)

• IPNC (Internet Protocol Network Controller) VoiceServer Address

Mobile Radio-to-VIU-to-MDC

(Refer to illustration and instructions on pages 18-19)

In addition to the above, the following components will be required for adding a Voice Interface Unit (VIU) to the configuration:

• VIU (Voice Interface Unit)

• 10-foot serial cable DB9F – DB9M (BlackBox p/n: EDN12J-0010-MF) to connect VIU to the mobile radio (included)

NOTE:

IP Addressing is site-dependent.