Installation Guide

MDCMR-Guide.doc\4-Sep-03 Page 8 of 20

Step 8 Right click on the SLIP2IPMN connection and select

Properties.

Step 9 On the SLIP2IPMN window, under the General tab,

deselect Us

e area code and Dialing Properties.

Step 10 Under the Server Types tab, under Type of Dial-Up

Server: select on SLIP: Unix Connection.

For Windows Me

, use the Networking tab.

Step 11 Under Advanced options: deselect Log on to network.

Under Allowed network protocols: select T

CP/IP, then

click on the TCP

/IP Settings... button.

Step 12 On the TCP/IP Settings window, select Specify an I

address. In the IP address field, enter the MDC IP

address. This IP address should conform to the

address table established by the system administrator.

NOTE

: The MDC, VIU, and Radio IP addresses must

be unique.

Then select Se

rver assigned name server addresses

and deselect Use IP header c

ompression. Select Use

default g

ateway on remote network. Click on the OK

button to continue.

Step 13 On the SLIP2IPMN window, click on the Scripting tab

and click on the B

rowse... button.

SLIP2IPMN

192.168.1.5

SLIP2IPMN