User's Manual

SECTION 3: INSTALLATION INSTRUCTIONS
M64700G25-FCCRpt.doc Page 6
Installation Overview
This chapter provides the basic steps involved in the installation process of an IPSeries High Speed
Mobile Radio into a vehicle. This chapter includes wire routing and connections between the high speed
mobile radio, other components, and the vehicle’s power.
a
To prevent personal injury and vehicle damage, exercise extreme caution throughout the
installation process and follow the reminders listed below.
 Follow safety precautions for handling wiring, tools, and a vehicle’s engine.
 Handle the vehicle’s battery with extreme caution to avoid burns.
 Do not
alter the components listed in the Installation Requirements section below, unless
substitutions are noted within this chapter.
 Once the antennas are installed
, as directed within this user manual, all persons must
maintain a distance of no less than 39 inches from the antennas while the high speed mobile
radio is in the transmit mode.
Installation Requirements
Table 3 lists the documents required to successfully install the high speed mobile radio and connect to
the various components within the vehicle:
TABLE 3: DOCUMENTS REQUIRED FOR HIGH SPEED MOBILE RADIO INSTALLATION
DESCRIPTION PART NUMBER
The following documents are available on the Product Documentation CD
enclosed in the shipment with the high speed mobile radio:
480.0001.001
 M64700G25 High Speed Mobile Radio Product Owner’s Manual 516.80528.POM
 Installation Guide for Mobile Computer Setup for Communication with
the Mobile Radio
516.80310.IG