mac

Commands for LLDP Function
131
LLDP interval :30
LLDP txTTL :120
LLDP txShutdownWhile :2
LLDP NotificationInterval :5
LLDP txDelay :20
-------------END------------------
7.17 show lldp interface ethernet
Command: show lldp interface ethernet <IFNAME>
Function: Display the configuration information of LLDP on the port, such as: the
working state of LLDP Agent.
Parameters: <IFNAME>: Interface name.
Default: Do not display the configuration information of LLDP on the port.
Command Mode: Admin Mode, Global Mode.
Usage Guide: Users can check the configuration information of LLDP on the port by
using “show lldp interface ethernet XXX”.
Example: Check the configuration information of LLDP on the port after LLDP is enabled
on the switch.
Switch(config)#show lldp interface ethernet 1/1
Port name : ethernet 1/1
LLDP Agent Adminstatus: Both
LLDP Operation TLV: portDecs sysName sysDesc sysCap
LLDP Trap Status: disable
LLDP maxRemote: 100
LLDP Overflow handle: discard
LLDP interface remote status : Full
7.18 show lldp neighbors interface ethernet
Command: show lldp neighbors interface ethernet < IFNAME >
Function: Display the LLDP neighbor information of the port.
Parameters: None.
Default: Do not display the LLDP neighbor information of the port.
Command Mode: Admin Mode, Global Mode.
Usage Guide: Users can check the LLDP neighbor information of the port by using
“show lldp neighbors interface ethernet XXX”.