mac

Commands for LLDP Function
132
Example: Check the LLDP neighbor information of the port after LLDP is enabled on the
port.
Switch(config)#show lldp neighbors interface ethernet 1/1
7.19 show lldp traffic
Command: show lldp traffic
Function: Display the statistics of LLDP data packets.
Parameters: None.
Default: Do not display the statistics of LLDP data packets.
Command Mode: Admin Mode, Global Mode.
Usage Guide: Users can check the statistics of LLDP data packets by using “show lldp
traffic”.
Example: Check the statistics of LLDP data packets after LLDP is enabled on the
switch.
Switch(config)#show lldp traffic
PortName Ageouts FramesDiscarded FramesInErrors FramesIn FramesOut TLVsDiscarded
Ethernet1/1 0 0 0 0 7 0
TLVsUnrecognized
0