mac

Commands for Port Channel
137
8.9 show port-group
Command: show port-group [<port-group-number>] {brief | detail |}
Function: Display the specified group number or the configuration information of all
port-channel which have been configured.
Parameters: <port-group-number> is the group number of port channel to be
displayed, from 1～14; brief displays summary information; detail displays detailed
information.
Command mode: All Configuration Mode.
Usage Guide: If the user does not input port-group-number, that means the information
of all the existent port-group are showed; if the port channel corresponds to
port-group-number parameter and is not exist, then print a error message, otherwise
display the current port-channel information of the specified group number.
Example: 1. Display summary information for port-group 1.
Switch#show port-group brief
ID: port group number; Mode: port group mode such as on active or passive;
Ports: different types of port number of a port group,
the first is selected ports number, the second is standby ports number, and
the third is unselected ports number.
ID Mode Partner ID Ports Load-balance
-------------------------------------------------------------------------------------
1 active 0x8000,00-12-cf-4d-e1-a1 8,1,1 dst-src-mac
10 passive 0x8000,00-12-cf-4d-e1-b2 8,2,0 dst-src-ip
20 on 8,0,0 src-ip
2. Display the detailed information of port-group 1.
Switch#show port-group 1 detail
Flags: A -- LACP_Activity, B -- LACP_timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Port-group number: 1, Mode: active, Load-balance: dst-src-mac
Port-group detail information:
System ID: 0x8000,00-03-0f-0c-16-6d
Local:
Port Status Priority Oper-Key Flag
-----------------------------------------------------------
Ethernet1/1 Selected 32768 1 {ACDEF}