mac

Commands for EFM OAM
151
Function: Configure the timeout of OAM connection, no command restores the default
value.
Parameters: <seconds>, the timeout ranging from 5 to 10 seconds.
Command Mode: Port mode
Default: 5s.
Usage Guide: OAM connection will be disconnected if no OAMPDU is received after
specified timeout.
Example: Set the timeout of OAM connection for ethernet 1/4 to be 6 seconds.
Switch(Config-If-Ethernet1/4)#ethernet-oam timeout 6
10.26 show ethernet-oam
Command: show ethernet-oam [{local | remote} interface {ethernet |} <IFNAME>]
Function: Show Ethernet OAM connection of specified or all ports.
Parameters: Overview information of all Ethernet OAM connections will be shown if no
parameters is input
local, show detailed information of local OAM connection
remote, show detailed information of remote OAM connection
<IFNAME>, the port that OAM connection information will be shown
Command Mode: Admin mode
Default: N/A.
Usage Guide: N/A.
Example: Show overview information of Ethernet OAM connection.
Switch#show ethernet-oam
Remote-Capability codes: L - Link Monitor, R - Remote Loopback
U - Unidirection, V - Variable Retrieval
-----------------------------------------------------------------------------------------------------------------
Interface Local-Mode Local-Capability Remote-MAC-Addr Remote-Mode
Remote-Capability
1/1 active L R 0003.0f02.2e5d active L R
1/2 active L R 0003.0f19.3a3e avtive L R
1/4 active L R 0003.0f26.480c passive L R
1/5 active L R 0003.0f28.020a active L R
Field
Description
Interface
port with Ethernet OAM enabled
Local-Mode
Working mode of the local port OAM.
Local-Capability
Functions are supported by local port OAM