mac

Commands for PORT SECURITY
163
Parameter: protect：Protect mode, it will trigger the action that do not learn the new MAC,
drop the package and do not send the warning.
restrict：Restrict mode, it will trigger the action that do not learn the new MAC,
drop the package, send snmp trap and record the configuration in syslog.
shutdown：Shutdown mode is the default mode. Under this condition, the
interface is disabled directly, send snmp trap and record the configuration in syslog.
Default: Shutdown.
Command Mode: Port mode
Usage Guide: None.
Example: Configure violation mode as protect for the interface.
Switch(config-if-ethernet1/1)#switchport port-security violation protect