mac

Commands for DDM
164
Chapter 12 Commands for DDM
12.1 clear transceiver threshold-violation
Command: clear transceiver threshold-violation [interface ethernet
<interface-list>]
Function: Clear the threshold violation of the transceiver monitoring.
Parameter: interface ethernet <interface-list>: The interface list that the threshold
violation of the transceiver monitoring needs to be cleared.
Command Mode: Admin mode
Default: None.
Usage Guide: None.
Example: Clear he threshold violation of the transceiver monitoring on port 21, 25, 26,
28.
Switch#clear transceiver threshold-violation interface ethernet 1/21;25-26;28
12.2 debug transceiver
Command: debug transceiver {on | off}
Function: Enable/disable DDM debugging.
Parameter: on/off: Enable or disable the debugging.
Command Mode: Admin mode
Default: Off.
Usage Guide: Disable the DDM debugging with ctrl+o.
Example: Enable DDM debugging.
Switch#debug transceiver on
12.3 show transceiver
Command: show transceiver [interface ethernet <interface-list>] [detail]
Function: Show the monitoring of the transceiver.
Parameter: interface ethernet <interface-list>: The interface list that the monitoring of
the transceiver needs to be shown.
detail：Show the detailed monitoring of the transceiver.