mac

Commands for LLDP-MED
170
13.4 lldp med fast count
Command: lldp med fast count <value>
no lldp med fast count
Function: When the fast LLDP-MED startup mechanism is enabled, it needs to fast
send LLDP packets with LLDP-MED TLV, this command sets the value of sending the
packets fast, the no command restores the default value.
Parameter: value: The number of sending the packets fast, its range from 1 to 10, unit is
entries.
Default: 4.
Command Mode: Global mode
Usage Guide: With this command, set the number for sending the packets fast.
Example:
Switch(config)#lldp med fast count 5
13.5 lldp med trap
Command: lldp med trap {enable | disable}
Function: Configure the specified port to enable or disable the function for sending
TRAP message when LLDP-MED network topology is changed.
Parameters: enable: Enable LLDP-MED TRAP for the port
disable: Disable LLDP-MED TRAP for the port
Default: Disable LLDP-MED TRAP.
Command Mode: Port mode
Usage Guide: Enable or disable LLDP-MED TRAP of the port.
Example: Enable LLDP-MED TRAP of the port 19.
Switch(Config-If-Ethernet1/19)# lldp med trap enable
13.6 lldp transmit med tlv all
Command: lldp transmit med tlv all
no lldp transmit med tlv all
Function: Configure the specified port to send all LLDP-MED TLVs, the no command
disables the function.
Parameter: None.
Default: Port does not enable the function for Sending LLDP-MED TLV.
Command Mode: Port mode