mac

Commands for LLDP-MED
171
Usage Guide: After configuring this command, if the port is able to send LLDP-MED
TLV, the sent LLDP packets with LLDP-MED TLV supported by all switches. However,
LLDP packets sent by the port without any LLDP-MED TLV after the switch configured
the corresponding no command.
Example: Port 19 enables the function for sending LLDP-MED TLV.
Switch(Config-If-Ethernet1/19)# lldp transmit med tlv all
13.7 lldp transmit med tlv capability
Command: lldp transmit med tlv capability
no lldp transmit med tlv capability
Function: Configure the specified port to send LLDP-MED Capability TLV. The no
command disables the capability.
Parameter: None.
Default: The function is disabled for sending LLDP-MED Capability TLV.
Command Mode: Port mode
Usage Guide: After configuring this command, if the port is able to send LLDP-MED
TLV, the sent LLDP packets with LLDP-MED Capability TLV. However, LLDP packets
sent by the port without LLDP-MED Capability TLV after the switch configured the
corresponding no command. Note: LLDP-MED Capability TLV is the important
LLDP-MED TLV, if do not configure the port to send LLDP-MED Capability TLV firstly,
other LLDP-MED TLV will not be sent.
Example: Port 19 enables the function for sending LLDP-MED Capability TLV.
Switch(Config-If-Ethernet1/19)# lldp transmit med tlv capability
13.8 lldp transmit med tlv extendPoe
Command: lldp transmit med tlv extendPoe
no lldp transmit med tlv extendPoe
Function: Configure the specified port to send LLDP-MED Extended Power-Via-MDI
TLV. The no command disables the capability.
Parameter: None.
Default: The function is disabled for sending LLDP-MED Extended Power-Via-MDI TLV.
Command Mode: Port mode
Usage Guide: After configuring this command, if the port is able to send LLDP-MED
TLV, LLDP packets with LLDP-MED Extended Power-Via-MDI TLV sent by the port.
However, LLDP packets without LLDP-MED Extended Power-Via-MDI TLV sent by the