mac

Commands for bpdu-tunnel
178
command cancels the operation.
Parameter: None.
Command Mode: Port mode
Default: Port does not forward any protocol packets across the tunnel.
Usage Guide: Disable gvrp function on the port before configuring this command.
Example: Configure Ethernet 4/5 to forward gvrp packets across the tunnel.
Switch(Config)#in ethernet 4/5
Switch(Config-if-ethernet 4/5)#bpdu-tunnel gvrp
14.4 bpdu-tunnel uldp
Command: bpdu-tunnel uldp
no bpdu-tunnel uldp
Function: Configure the specified port to forward uldp packets across the tunnel, the no
command cancels the operation.
Parameter: None.
Command Mode: Port mode
Default: Port does not forward any protocol packets across the tunnel.
Usage Guide: Disable uldp function on the port before configuring this command.
Example: Configure Ethernet 4/5 to forward uldp packets across the tunnel.
Switch(Config)#in ethernet 4/5
Switch(Config-if-ethernet 4/5)#bpdu-tunnel uldp
14.5 bpdu-tunnel lacp
Command: bpdu-tunnel lacp
no bpdu-tunnel lacp
Function: Configure the specified port to forward lacp packets across the tunnel, the no
command cancels the operation.
Parameter: None.
Command Mode: Port mode
Default: Port does not forward any protocol packets across the tunnel.
Usage Guide: Disable lacp function on the port before configuring this command.
Example: Configure Ethernet 4/5 to forward lacp packets across the tunnel.
Switch(Config)#in ethernet 4/5
Switch(Config-if-ethernet 4/5)#bpdu-tunnel lacp